18+ Content Warning

This forum may contain content not suitable for minors.
By clicking "Enter", you confirm that you are
18 years of age or older
and agree to proceed at your own discretion.
Be sure to Read the Terms and Rules before participating.

  • A limited run of Nevada Shooters hats are now available!
    CLICK HERE for details!

Found. Please close

Status
Not open for further replies.
I have a used brownells barrel extension tool that is in good shape I can sell. $30 will take it, and a chunk of 1/2 square stock home I find it the most versatile. you can chuck the stock in your vice slide the tool on the end, and it holds the upper while you wrench on your muzzle device/barrel nut. Or you can put your wrench in the vice, and insert your torque wrench into the tool and crank from center axis. I bought another thinking I would wear one out, and I don't think it will happen
 
GunButler said:
I have a used brownells barrel extension tool that is in good shape I can sell. $30 will take it, and a chunk of 1/2 square stock home I find it the most versatile. you can chuck the stock in your vice slide the tool on the end, and it holds the upper while you wrench on your muzzle device/barrel nut. Or you can put your wrench in the vice, and insert your torque wrench into the tool and crank from center axis. I bought another thinking I would wear one out, and I don't think it will happen
Click to expand...

I’ll send you a PM
 
Status
Not open for further replies.
Back
Top