Hello,
I am selling my AR15. It is used and has around 700 rounds through it. It is a fraken-ar, and Ill list out all the parts below. It is in good condition, with some wear on the brass deflector, and ejection port. I clean it after every range trip, and have taken great care of it. One thing that should be mentioned is that the dust cover spring does not work. The dust cover open and closes properly, however there is no spring tension when it is down. This has never bothered me so I didn't fix it, but I believe its a somewhat simple fix with a new spring. I am asking 850$. I am located in the Las Vegas area and do not want to ship. Not really looking for any trades either. Here is the list of parts:
Upper receiver: Delton
BCG: YHM
Lower receiver: S&W
Lower reciever parts kit: CMMG
Buffer tube: BCM
Buffer and spring: JP Enterprises H buffer
Barrel: AR Stoner 16" 1:9 M4 profile
Rail: Midwest Industries 13" Free float
Stcok: Magpul STR
Sights: Magpul BUIS
Rail Covers: Magpul XTR
Charging Handle: BCM Medium
Gas System: I forget the exact brand but it was high quality and is held in place by 3 screws which are loctited and have not come loose.
Foregrip: Magpul
If I forgot anything feel free to ask! Thank you for looking. Evan
I am selling my AR15. It is used and has around 700 rounds through it. It is a fraken-ar, and Ill list out all the parts below. It is in good condition, with some wear on the brass deflector, and ejection port. I clean it after every range trip, and have taken great care of it. One thing that should be mentioned is that the dust cover spring does not work. The dust cover open and closes properly, however there is no spring tension when it is down. This has never bothered me so I didn't fix it, but I believe its a somewhat simple fix with a new spring. I am asking 850$. I am located in the Las Vegas area and do not want to ship. Not really looking for any trades either. Here is the list of parts:
Upper receiver: Delton
BCG: YHM
Lower receiver: S&W
Lower reciever parts kit: CMMG
Buffer tube: BCM
Buffer and spring: JP Enterprises H buffer
Barrel: AR Stoner 16" 1:9 M4 profile
Rail: Midwest Industries 13" Free float
Stcok: Magpul STR
Sights: Magpul BUIS
Rail Covers: Magpul XTR
Charging Handle: BCM Medium
Gas System: I forget the exact brand but it was high quality and is held in place by 3 screws which are loctited and have not come loose.
Foregrip: Magpul
If I forgot anything feel free to ask! Thank you for looking. Evan