Pelican 1750 rifle case in EXCELLENT condition. Built like a tank and twice as strong! The 2 upper foams are cemented and the reverse side was cut to fit an RPR 338 Lapua. There is no problem using the case as shown, but you will need to buy new upper ( about $40) if you want to custom cut. Case is $269 new online Selling this for Only $95!! .
Features of Pelican 1750 Long Case
Features of Pelican 1750 Long Case
- Interior dimensions: 50.5" x 13.5" x 5.25"
- Exterior dimensions: 53" x 16" x 6.12"
- Polypropylene body
- Open cell core with solid wall design
- Two polyurethane wheels with stainless steel bearings
- Fold down side handle
- Double throw latches
- ABS latch
- Automatic pressure equalization valve
- Polymer O-ring seal
- Dustproof and crushproof
- Watertight
- Stainless steel hardware and padlock protector
- 1.3 lb polyurethane foam
- Three-piece foam set
- ABS purge body
- Three micron hydrophobic non-woven purge vent
- 70 shore nitrile purge O-ring
- Lid depth: 1.75"
- Bottom depth: 3.50"
- Total depth: 5.25"
- Interior volume: 2.07 cu ft
- Weight with foam: 25.57 lbs
- Weight without foam: 23.59 lbs
- Buoyancy: 187.39 lbs
- Maximum temperature: 210° F
- Minimum temperature: -40° F
- IP67 / STANAG 4280 / Def Stan 81-41 certified
