Between a baby girl a wife and work I have very little time to properly concentrate on reloading and have found myself losing interest and rushing things. The following is equipment and tools I have accumulated in the last 3 years since I started reloading. I have created packages of items but if you want to mix and match stuff just PM me and we can work things out.
All original accessories and manuals included for each item. And everything is in excellent condition.
RCBS Rock chucker supreme with inline fabrication mount, shell holder (308 base cartridges) lock and load bushing system (6 die bushings) RCBS uni flow powder dispenser with stand and baffle, RCBS hand held priming tool with shell holder (308 base cartridges), lee decapping die, Hornady bullet puller die- $425
A&D EJ-54D2 Dual Range - 22g x 0.0002g / 52g x 0.001g Reloading scale- $300
Mitutoyo digimatic calipers with SAC bullet and case comparator and comparator body (6.5 creedmoor specific) and Hornady anvil- $180
Hornady modified case (6.5 CM) and overall length tool, lil crow worlds best trimmer (6.5 CM) and Sinclair concentricity gauge with dial- $160
Annealeez annealing machine- $160 (works perfectly but could use replacement wheels $25 on their website)
FA tumbler lite with SS media (2lbs), Lyman sifter pan and FA platinum series case prep station $180
Berger 144 HT 6.5mm 500ct-$340
Barnes MB 145 6.5mm 500ct-$150
H4350 8lbd (sealed) $350
IMR4350 8lbs (unsealed but not used)-$300
2000 FGMM SRP- $240
2000 CCI MG SRP- $200
Whidden seater and FL sizing (non-bushing) die set 6.5 CM with shoulder bump gauge and 3 seating stems (standard, Hornady 135 A-tip, Berger 140 Hybrid), 21st century mandrel with various mandrel sizes (.2615, .2415, .2405) - $260
Would prefer meeting in the North east of town around NFA but can discuss reasonable place.
All original accessories and manuals included for each item. And everything is in excellent condition.
RCBS Rock chucker supreme with inline fabrication mount, shell holder (308 base cartridges) lock and load bushing system (6 die bushings) RCBS uni flow powder dispenser with stand and baffle, RCBS hand held priming tool with shell holder (308 base cartridges), lee decapping die, Hornady bullet puller die- $425
A&D EJ-54D2 Dual Range - 22g x 0.0002g / 52g x 0.001g Reloading scale- $300
Mitutoyo digimatic calipers with SAC bullet and case comparator and comparator body (6.5 creedmoor specific) and Hornady anvil- $180
Hornady modified case (6.5 CM) and overall length tool, lil crow worlds best trimmer (6.5 CM) and Sinclair concentricity gauge with dial- $160
Annealeez annealing machine- $160 (works perfectly but could use replacement wheels $25 on their website)
FA tumbler lite with SS media (2lbs), Lyman sifter pan and FA platinum series case prep station $180
Berger 144 HT 6.5mm 500ct-$340
Barnes MB 145 6.5mm 500ct-$150
H4350 8lbd (sealed) $350
IMR4350 8lbs (unsealed but not used)-$300
2000 FGMM SRP- $240
2000 CCI MG SRP- $200
Whidden seater and FL sizing (non-bushing) die set 6.5 CM with shoulder bump gauge and 3 seating stems (standard, Hornady 135 A-tip, Berger 140 Hybrid), 21st century mandrel with various mandrel sizes (.2615, .2415, .2405) - $260
Would prefer meeting in the North east of town around NFA but can discuss reasonable place.