CZ P10 C
Night Fision Night Sights
HB Industries Theta Trigger Kit Installed:
P10 Theta Trigger Kit
Flat Trigger with 4mm Reduction in Pre-Travel Take Up
Includes -10% and -15% Reduced Weight Striker Springs (Springs not compatible with P10 45ACP Model)
Fits many CZ-UB and CZ-USA P10 models (incl. P10S, P10C, P10F)
Approved for use in USPSA Production Division
-15% Spring Maintains Pull Weight above 3lbs for IPSC
Machined Aluminum 6061-T6
Made in USA, Drop In Replacement
The Theta trigger for the CZ P10 is a flat faced trigger that reduces pre-travel take up by 4mm with respect to the factory trigger. There are no adjustable screws or failure points, the pre-travel reduction is achieved through solid geometry that is machined into the body of the trigger. Our P10 Theta trigger kit also allows the user to tune the trigger pull weight by using the either of the included -10% or -15% striker springs.
Approximately 400 rounds fired with no issues
Comes with OEM Box
Backstraps ETC.
2x15 RD Magazines
Asking $500.
Willing to meet at any FFL west of the BLVD
No trades please
Includes 2x16 Rd mags
Installed :
The Apex Flat-Faced Action Enhancement Kit for the SD VE and SD model pistols from Smith & Wesson directly replaces the factory hinged trigger with a solid body, flat-faced polymer trigger with a center mounted pivoting safety.
- Reduces trigger pull weight approximately 2.0 lbs
- Reduces pre-travel and overtravel
- Provides a smoother trigger pull with improved reset
- Maintains factory safety values
1 ea. Polymer Flat-Faced Action Enhancement Trigger
1 ea. Trigger Return Spring
1 ea. Sear Spring
1 ea. Striker Block Spring
1 ea. Striker Spring
Approximately 200 rds fired with no issues.
Asking 300.00 OBO
Not looking for trades unless it's bulk 9mm brass
Transfer at NFA
Night Fision Night Sights
HB Industries Theta Trigger Kit Installed:
P10 Theta Trigger Kit
Flat Trigger with 4mm Reduction in Pre-Travel Take Up
Includes -10% and -15% Reduced Weight Striker Springs (Springs not compatible with P10 45ACP Model)
Fits many CZ-UB and CZ-USA P10 models (incl. P10S, P10C, P10F)
Approved for use in USPSA Production Division
-15% Spring Maintains Pull Weight above 3lbs for IPSC
Machined Aluminum 6061-T6
Made in USA, Drop In Replacement
The Theta trigger for the CZ P10 is a flat faced trigger that reduces pre-travel take up by 4mm with respect to the factory trigger. There are no adjustable screws or failure points, the pre-travel reduction is achieved through solid geometry that is machined into the body of the trigger. Our P10 Theta trigger kit also allows the user to tune the trigger pull weight by using the either of the included -10% or -15% striker springs.
Approximately 400 rounds fired with no issues
Comes with OEM Box
Backstraps ETC.
2x15 RD Magazines
Asking $500.
Willing to meet at any FFL west of the BLVD
No trades please
Includes 2x16 Rd mags
Installed :
The Apex Flat-Faced Action Enhancement Kit for the SD VE and SD model pistols from Smith & Wesson directly replaces the factory hinged trigger with a solid body, flat-faced polymer trigger with a center mounted pivoting safety.
- Reduces trigger pull weight approximately 2.0 lbs
- Reduces pre-travel and overtravel
- Provides a smoother trigger pull with improved reset
- Maintains factory safety values
1 ea. Polymer Flat-Faced Action Enhancement Trigger
1 ea. Trigger Return Spring
1 ea. Sear Spring
1 ea. Striker Block Spring
1 ea. Striker Spring
Approximately 200 rds fired with no issues.
Asking 300.00 OBO
Not looking for trades unless it's bulk 9mm brass
Transfer at NFA
Last edited: