**UPDATE 2/25 - REMAINING UNSOLD ITEMS ARE PULLED/WITHDRAWN DUE TO A LACK OF INTEREST**
TERMS OF SALE: CASH/FUNDS ONLY, NO TRADES. All items are in used but great condition unless listed otherwise. If the listed prices do not agree with you, feel free to make an offer, worst I can do is kindly decline it. I am located in Pahrump, more than happy to meet in Pahrump or Vegas for FFL transfer. All items will require FFL transfer, buyer will cover the FFL fees. I prefer cash or Zelle for payment.
ALL PRICES LISTED ARE OBO (OR BEST OFFER). PLEASE KEEP SCROLLING DOWN TO SEE ALL OF THE PICS. THANK YOU
Long story short, its time to thin the herd. I have a potential relocation coming up soon and won't have room for all of my collection. Here we go....
PISTOLS:
**WITHDRAWN/REMOVED** Glock/Zev 17 9mm- Gen 5 G17 frame, Zev Citadel slide, OEM G17 barrel w/ Titanium Nitride Finish, full 360 grip texturing from Valkyrie Combat, Ameriglo Suppressor sights, HYVE Technologies, extended mag release. Comes with OEM case and one unused OEM 17rd magazine. Asking $750 $699 $675 OBO.
**SOLD** Gen 2 Glock 19 9mm- all stock, no modifications, used but taken care of. Comes with the old school tupperware container and one unused OEM 15rd magazine. Asking $440 $410 $400 OBO.
**SOLD** HK P30L V3 9mm- Full size 9mm, traditional double/single action with a decocker on the back of the slide. I had my gunsmith install a lighter mainspring to smooth out the DA trigger pull, and the Grayguns short reset kit. Comes with the OEM case, two OEM 17rd magazines, and a JM Custom Kydex AIWB/IWB rig. Asking $699 $650 OBO.
**SOLD** Sig Sauer P226R 9mm- bought it used, appears to have minimal use. The following upgrades were installed: G10 checkered grips in black, Grayguns Inc. stainless guide rod, Sig SRT reduced trigger reset kit, Wolff hammer spring installed, Dawson Precision blacked out rear sight w/ fiber optic front sight. Will include all original OEM parts (except the original grips), additional Wolff recoil spring, additional Wolff hammer springs of different weights, Comp-Tac IWB holster, two magazines (one 10rd/one 15rd) and OEM blue box case. Be advised the case was missing some foam and one of the latches courtesy of the previous owner. This would make a great all around pistol, or a good contender for USPSA Production class or IDPA Stock Service class. Asking $750 $699 $625 OBO
**SOLD** Sig Sauer P365XL 9mm- I am the original owner, it was one of my main CCW guns for a while. I used it with a Holosun 507K, it was superbly accurate with Speed GDHP and would often shoot sub 2" groups at 25 yards. Gun is completely in stock form at this time other than the titanium nitride coating on the barrel. Will come with the following: OEM case, two 12rd magazines, two 15rd magazines, one extra gray frame, one Vedder IWB holster, one Raven Concealment OWB holster, and one paddle holster. Asking $550 OBO.
*S&W 3913 9mm- 3rd Gen Smith, single stack compact design, 3.5" barrel, stainless finish. This is not the "LadySmith" marked model, just a regular 3913 which are getting harder to find from what I've read. Comes with OEM case and one 8rd magazine. Asking $600 $550 $500 OBO.
**SOLD** S&W 4506 .45 Auto- 3rd Gen Smith, full size single stack .45 ACP with a 5" barrel, stainless finish. This is a large gun, it’s definitely on the heavier side, but is very soft shooting due to the weight. Myself nor the previous owner used it very much, the recoil spring is still very stiff to this day. Comes with a OEM case and two OEM 8rd magazines. I checked a few different auction site and they're all bidding between $900-1100, so save yourself a few bucks and buy mine so you can live out your Denzel Training Day cosplay haha.... Asking $750 $700 OBO.
*S&W 5906 9mm- 3rd Gen Smith, full size double stack 9mm, 4" barrel, stainless finish. This was someone's duty gun that I found in the consignment rack. Solid shooter, short reset and plenty accurate. This does not come with a case, I have three 15rd magazines for it (1 OEM, 2 MecGar). Asking $500 $450 $425 OBO.
**SOLD** Walther PDP Full Size 9mm- Full size frame with the 4.5" barrel, striker fired. I fired this exclusively with a Steiner MPS installed, and it ran flawlessly and accurately. Gun is all stock, no trigger mods, grip mods etc. My gunsmith installed a set of the Walther made optics height iron sights, they give a nice lower 1/3 sight picture. I have two optics plates for it that I'm including. First one is a Walther marked plate for all RMR footprint optics, second is a CHPWS made plate for the Steiner MPS and Aimpoint ACRO. Comes with the OEM case and two 18rd magazines, and one JM Custom Kydex IWB/AIWB rig in OD Green. Asking $550 OBO.
REVOLVERS:
**SOLD** S&W Model 19-4: pinned & recessed 4" K-frame in .357 Magnum with a 6" barrel. I believe the serial number puts it around 1980 manufacture. The blue finish is in excellent condition and holds a nice shine. Whoever owned this before I did took great care of it. This has mostly been a safe queen for me, I've probably only fired it 2-3 times. This does not come with a case. Will include the older Safariland brown leather hip holster it came with. Asking $700 OBO.
*S&W Model 640-1: early 90's manufacture, no lock, stainless steel (not alloy), 2" J-frame in .357 Magnum. Excellent option for a CCW piece. Handles full power magnum loads without issue. Had a Hi-Viz front sight installed, as well as the Apex Tactical j-frame spring kit. Smooth trigger and the sights shoot POA/POI. I have the original springs and front sight as well. Gun came with the discontinued Uncle Mike's hard rubber grips, I found another set of the short Uncle Mike's boot grips for it that its currently wearing. Holster is a one off from JM Custom Kydex in red carbon fiber finish. Asking $700 $625 $575 OBO.
RIFLES:
**SOLD** Aero Precision/Colt full size AR-15- parts breakdown: Aero Precision lower, Rock River LPK, Rock River A2 stock kit, Colt 20" USGI flat top upper receiver group, Colt carry handle, Colt BCG, Colt charging handle. I'm terrible at shooting irons on a rifle, and this thing will shoot 2" groups with cheap 55gr FMJ at 100 yards all day. This was a range toy, never used for duty/competition or anything serious. Asking $720 $625 OBO.
**WITHDRAWN/REMOVED** Aero Precision M5: this is a complete custom build with precision being the goal, all parts were assembled by a licensed gunsmith. Parts breakdown: Aero Precision M5 lower, Aero Precision LPK, Geissele SD-E trigger, Larue pistol grip, Knight's Receiver extension kit, Magpul ACS stock, Aero Precision stripped M5 upper receiver, Aero Precision .308 BCG, Aero Precision charging handle, Ballistic Advantage Hanson series barrel (16" midlength .308), SLR Rifleworks forend, PWS FSC30 comp, Zero Bravo handstop, ADM bipod mount, Harris bipod, lower and forend were Cerakote'd in Magpul FDE, barrel was finished in flat black. Between parts, labor, and Cerakote fees, I'm about $2300 into this build. Will also throw in 60 rounds of Federal 168gr GMM. I just never caught the precision bug and have probably fired maybe 100 rounds through it in the past 6 years. It’s a solid rig for the price, asking $1700 $1550 OBO.
**SOLD** Remington 700 BDL- classic older model BDL, chambered in .30-06, 22" barrel I believe, equipped with a simple 3x-9x Leupold duplex scope. The blueing is still in great shape and has a lot of life left in it. This rifle has taken many game all over the great state of Nevada. Comes with a bipod and a two shot cartridge cuff, and an old school leather sling. Asking $600 OBO.
SHOTGUNS:
*Beretta A300 Outlander- Beretta's "entry level" semiauto, 12 GA, 28" barrel, black finish. Overall its in good condition, never saw a day in the field, it was my gun for clays. Very soft recoiling and cycles all brands of cheap target loads. Comes with the factory case in the picture. Asking $550 $500 OBO.
**SPF** Ithaca Model 37 "DS Police Special" - 12GA pump action, with the bottom ejection/loading port, 18" barrel. It came equipped with a pre-Surefire "Laser Products" forend light, but no light. I found the period correct incandescent head with blued finish. Light still works great. I believe this is one of the models that still had the slam-fire feature before they discontinued it. And according to the seller I bought it from, this was a Palm Springs PD patrol shotgun. Asking $500 OBO.
DM ME WITH ANY QUESTIONS YOU MAY HAVE, AND KEEP SCROLLING FOR THE OTHER PICS. THANK YOU!
TERMS OF SALE: CASH/FUNDS ONLY, NO TRADES. All items are in used but great condition unless listed otherwise. If the listed prices do not agree with you, feel free to make an offer, worst I can do is kindly decline it. I am located in Pahrump, more than happy to meet in Pahrump or Vegas for FFL transfer. All items will require FFL transfer, buyer will cover the FFL fees. I prefer cash or Zelle for payment.
ALL PRICES LISTED ARE OBO (OR BEST OFFER). PLEASE KEEP SCROLLING DOWN TO SEE ALL OF THE PICS. THANK YOU
Long story short, its time to thin the herd. I have a potential relocation coming up soon and won't have room for all of my collection. Here we go....
PISTOLS:
**WITHDRAWN/REMOVED** Glock/Zev 17 9mm- Gen 5 G17 frame, Zev Citadel slide, OEM G17 barrel w/ Titanium Nitride Finish, full 360 grip texturing from Valkyrie Combat, Ameriglo Suppressor sights, HYVE Technologies, extended mag release. Comes with OEM case and one unused OEM 17rd magazine. Asking $750 $699 $675 OBO.
**SOLD** Gen 2 Glock 19 9mm- all stock, no modifications, used but taken care of. Comes with the old school tupperware container and one unused OEM 15rd magazine. Asking $440 $410 $400 OBO.
**SOLD** HK P30L V3 9mm- Full size 9mm, traditional double/single action with a decocker on the back of the slide. I had my gunsmith install a lighter mainspring to smooth out the DA trigger pull, and the Grayguns short reset kit. Comes with the OEM case, two OEM 17rd magazines, and a JM Custom Kydex AIWB/IWB rig. Asking $699 $650 OBO.
**SOLD** Sig Sauer P226R 9mm- bought it used, appears to have minimal use. The following upgrades were installed: G10 checkered grips in black, Grayguns Inc. stainless guide rod, Sig SRT reduced trigger reset kit, Wolff hammer spring installed, Dawson Precision blacked out rear sight w/ fiber optic front sight. Will include all original OEM parts (except the original grips), additional Wolff recoil spring, additional Wolff hammer springs of different weights, Comp-Tac IWB holster, two magazines (one 10rd/one 15rd) and OEM blue box case. Be advised the case was missing some foam and one of the latches courtesy of the previous owner. This would make a great all around pistol, or a good contender for USPSA Production class or IDPA Stock Service class. Asking $750 $699 $625 OBO
**SOLD** Sig Sauer P365XL 9mm- I am the original owner, it was one of my main CCW guns for a while. I used it with a Holosun 507K, it was superbly accurate with Speed GDHP and would often shoot sub 2" groups at 25 yards. Gun is completely in stock form at this time other than the titanium nitride coating on the barrel. Will come with the following: OEM case, two 12rd magazines, two 15rd magazines, one extra gray frame, one Vedder IWB holster, one Raven Concealment OWB holster, and one paddle holster. Asking $550 OBO.
*S&W 3913 9mm- 3rd Gen Smith, single stack compact design, 3.5" barrel, stainless finish. This is not the "LadySmith" marked model, just a regular 3913 which are getting harder to find from what I've read. Comes with OEM case and one 8rd magazine. Asking $600 $550 $500 OBO.
**SOLD** S&W 4506 .45 Auto- 3rd Gen Smith, full size single stack .45 ACP with a 5" barrel, stainless finish. This is a large gun, it’s definitely on the heavier side, but is very soft shooting due to the weight. Myself nor the previous owner used it very much, the recoil spring is still very stiff to this day. Comes with a OEM case and two OEM 8rd magazines. I checked a few different auction site and they're all bidding between $900-1100, so save yourself a few bucks and buy mine so you can live out your Denzel Training Day cosplay haha.... Asking $750 $700 OBO.
*S&W 5906 9mm- 3rd Gen Smith, full size double stack 9mm, 4" barrel, stainless finish. This was someone's duty gun that I found in the consignment rack. Solid shooter, short reset and plenty accurate. This does not come with a case, I have three 15rd magazines for it (1 OEM, 2 MecGar). Asking $500 $450 $425 OBO.
**SOLD** Walther PDP Full Size 9mm- Full size frame with the 4.5" barrel, striker fired. I fired this exclusively with a Steiner MPS installed, and it ran flawlessly and accurately. Gun is all stock, no trigger mods, grip mods etc. My gunsmith installed a set of the Walther made optics height iron sights, they give a nice lower 1/3 sight picture. I have two optics plates for it that I'm including. First one is a Walther marked plate for all RMR footprint optics, second is a CHPWS made plate for the Steiner MPS and Aimpoint ACRO. Comes with the OEM case and two 18rd magazines, and one JM Custom Kydex IWB/AIWB rig in OD Green. Asking $550 OBO.
REVOLVERS:
**SOLD** S&W Model 19-4: pinned & recessed 4" K-frame in .357 Magnum with a 6" barrel. I believe the serial number puts it around 1980 manufacture. The blue finish is in excellent condition and holds a nice shine. Whoever owned this before I did took great care of it. This has mostly been a safe queen for me, I've probably only fired it 2-3 times. This does not come with a case. Will include the older Safariland brown leather hip holster it came with. Asking $700 OBO.
*S&W Model 640-1: early 90's manufacture, no lock, stainless steel (not alloy), 2" J-frame in .357 Magnum. Excellent option for a CCW piece. Handles full power magnum loads without issue. Had a Hi-Viz front sight installed, as well as the Apex Tactical j-frame spring kit. Smooth trigger and the sights shoot POA/POI. I have the original springs and front sight as well. Gun came with the discontinued Uncle Mike's hard rubber grips, I found another set of the short Uncle Mike's boot grips for it that its currently wearing. Holster is a one off from JM Custom Kydex in red carbon fiber finish. Asking $700 $625 $575 OBO.
RIFLES:
**SOLD** Aero Precision/Colt full size AR-15- parts breakdown: Aero Precision lower, Rock River LPK, Rock River A2 stock kit, Colt 20" USGI flat top upper receiver group, Colt carry handle, Colt BCG, Colt charging handle. I'm terrible at shooting irons on a rifle, and this thing will shoot 2" groups with cheap 55gr FMJ at 100 yards all day. This was a range toy, never used for duty/competition or anything serious. Asking $720 $625 OBO.
**WITHDRAWN/REMOVED** Aero Precision M5: this is a complete custom build with precision being the goal, all parts were assembled by a licensed gunsmith. Parts breakdown: Aero Precision M5 lower, Aero Precision LPK, Geissele SD-E trigger, Larue pistol grip, Knight's Receiver extension kit, Magpul ACS stock, Aero Precision stripped M5 upper receiver, Aero Precision .308 BCG, Aero Precision charging handle, Ballistic Advantage Hanson series barrel (16" midlength .308), SLR Rifleworks forend, PWS FSC30 comp, Zero Bravo handstop, ADM bipod mount, Harris bipod, lower and forend were Cerakote'd in Magpul FDE, barrel was finished in flat black. Between parts, labor, and Cerakote fees, I'm about $2300 into this build. Will also throw in 60 rounds of Federal 168gr GMM. I just never caught the precision bug and have probably fired maybe 100 rounds through it in the past 6 years. It’s a solid rig for the price, asking $1700 $1550 OBO.
**SOLD** Remington 700 BDL- classic older model BDL, chambered in .30-06, 22" barrel I believe, equipped with a simple 3x-9x Leupold duplex scope. The blueing is still in great shape and has a lot of life left in it. This rifle has taken many game all over the great state of Nevada. Comes with a bipod and a two shot cartridge cuff, and an old school leather sling. Asking $600 OBO.
SHOTGUNS:
*Beretta A300 Outlander- Beretta's "entry level" semiauto, 12 GA, 28" barrel, black finish. Overall its in good condition, never saw a day in the field, it was my gun for clays. Very soft recoiling and cycles all brands of cheap target loads. Comes with the factory case in the picture. Asking $550 $500 OBO.
**SPF** Ithaca Model 37 "DS Police Special" - 12GA pump action, with the bottom ejection/loading port, 18" barrel. It came equipped with a pre-Surefire "Laser Products" forend light, but no light. I found the period correct incandescent head with blued finish. Light still works great. I believe this is one of the models that still had the slam-fire feature before they discontinued it. And according to the seller I bought it from, this was a Palm Springs PD patrol shotgun. Asking $500 OBO.
DM ME WITH ANY QUESTIONS YOU MAY HAVE, AND KEEP SCROLLING FOR THE OTHER PICS. THANK YOU!
Last edited:
