Final Price drop: All prices firm - transfer to be completed at Ventura
Walther Q5 Match (polymer frame) w/ 2 magazines and optic plate for RMRs. Great pistol, very accurate, probably has 500 rounds through it. - $650
Daniel Defense MK18 Upper (complete with BCG & Charging handle) - used maybe 150 rounds - comes with the box as it would brand new. (generally sell new at $1292 - right at $1400 with tax) - $1,000
Lightly used SCAR 20s in western viper camo. Put 40 rounds through this beautiful Scar 20s before needing the scope for my bolt gun. Haven't really wanted to go back to a semi auto (bolt gun is also a 6.5cm), so figure I'll sell this and go with something else that I'll shoot more often. Purchased in 2021 about 6 months before they came out with the NRCH version - $3500
Custom Build Spikes Tactical Lower - comes with the SBA3 FDE pistol brace, Giessele parts kit, Magpul FDE grip, Timmy 667S (3lb pull trigger) and JPE SCS Buffer; I have the original boxes for most everything included - likely keep for my next build, but since it isn't getting used, figured I'd list it - $650
Might trade for any higher end guns or optics - specifically looking for a 5” nighthawk custom in 9mm (cash on my end) or a CZ TS2 (can figure out difference in value)
----Sold----
Langdon LTT RDO Elite Carry Bevel (trigger job, carry bevel, NP3 coating) - Dehorning and Carry Bevel in frame and slide, mag well bevel, re-anodize the frame, cerakote the slide, NP3 finish on all small parts except for the extractor and springs (this is the factory option from LTT). Buttery smooth operation, but the ergonomics don't seem to fit me well. Cost me roughly $2350 landed and has maybe 100 rounds through it - $1,900 - Sold
H&K Elite (6” target barrel w/ match trigger) in 9mm. You’ll see these commonly in .45acp for relatively cheap, the 9mm version is decently rare. Brand new - never fired - $2200 - Sold
New - Custom Built Lewis Machine & Tool MARS-L 12" Piston AR-15 Pistol - just over $3k in the build - virtually all LMT parts sans Trigger, Spring & Brace - sold
Build list includes:
LMT MLC Upper Receiver - $889
LMT MARS-LS M7SL Lower Receiver - $430
LMT 12" Barrel - $680
Full Auto LMT BCG - $380
Geisselle SSP Flat Trigger - $220
JPE Silent Capture Spring (H2) - $175
SBA Brace - $85
MAR-L Lower Parts Kit w/ e-trigger guard - $84
Misc LMS parts, Magpul grip, etc - $100
Current year (2021) Staccato P DPO (optic plate ready version), lightly used. Overall, great condition, comes with all 3 magazines and case as shown in the pictures.
$2100 - $Pending
Walther Q5 Match (polymer frame) w/ 2 magazines and optic plate for RMRs. Great pistol, very accurate, probably has 500 rounds through it. - $650
Daniel Defense MK18 Upper (complete with BCG & Charging handle) - used maybe 150 rounds - comes with the box as it would brand new. (generally sell new at $1292 - right at $1400 with tax) - $1,000
Lightly used SCAR 20s in western viper camo. Put 40 rounds through this beautiful Scar 20s before needing the scope for my bolt gun. Haven't really wanted to go back to a semi auto (bolt gun is also a 6.5cm), so figure I'll sell this and go with something else that I'll shoot more often. Purchased in 2021 about 6 months before they came out with the NRCH version - $3500
Custom Build Spikes Tactical Lower - comes with the SBA3 FDE pistol brace, Giessele parts kit, Magpul FDE grip, Timmy 667S (3lb pull trigger) and JPE SCS Buffer; I have the original boxes for most everything included - likely keep for my next build, but since it isn't getting used, figured I'd list it - $650
Might trade for any higher end guns or optics - specifically looking for a 5” nighthawk custom in 9mm (cash on my end) or a CZ TS2 (can figure out difference in value)
----Sold----
Langdon LTT RDO Elite Carry Bevel (trigger job, carry bevel, NP3 coating) - Dehorning and Carry Bevel in frame and slide, mag well bevel, re-anodize the frame, cerakote the slide, NP3 finish on all small parts except for the extractor and springs (this is the factory option from LTT). Buttery smooth operation, but the ergonomics don't seem to fit me well. Cost me roughly $2350 landed and has maybe 100 rounds through it - $1,900 - Sold
H&K Elite (6” target barrel w/ match trigger) in 9mm. You’ll see these commonly in .45acp for relatively cheap, the 9mm version is decently rare. Brand new - never fired - $2200 - Sold
New - Custom Built Lewis Machine & Tool MARS-L 12" Piston AR-15 Pistol - just over $3k in the build - virtually all LMT parts sans Trigger, Spring & Brace - sold
Build list includes:
LMT MLC Upper Receiver - $889
LMT MARS-LS M7SL Lower Receiver - $430
LMT 12" Barrel - $680
Full Auto LMT BCG - $380
Geisselle SSP Flat Trigger - $220
JPE Silent Capture Spring (H2) - $175
SBA Brace - $85
MAR-L Lower Parts Kit w/ e-trigger guard - $84
Misc LMS parts, Magpul grip, etc - $100
Current year (2021) Staccato P DPO (optic plate ready version), lightly used. Overall, great condition, comes with all 3 magazines and case as shown in the pictures.
$2100 - $Pending
Last edited:
