jchen76
Active Member (5.56mm)
Forum Supporter
2023 Supporter
2024 Supporter
2025 Supporter
Trading Post Subscriber
Used B&T GHM9 Gen 2 SBR (NFA Item) up for sale. This is the ‘C’ model with 4.3” inch barrel with Glock 9mm lower.
https://bt-usa.com/products/ghm9c/
Original owner, great condition, converted into SBR during ATF brace amnesty. No additional engravings on the receiver. Has factory 3 position collapsible stock and also factory polymer side folder (latch does not line up to notch on receiver, I suspect it was meant for gen 1 receivers). Side folder extended functions fine as buttstock.
Also included in Dead Air Wolfman 9mm suppressor. The muzzle device installed uses key-mo quick attach system. Very versatile suppressor. Include original 1/2x28 direct thread adapter.
https://deadairsilencers.com/silencers/wolfman/
GHM9 with wolfman shoots great. Low recoil and almost no gas blowback suppressed. About 1500 rounds through platform. Shoots everything from cheap 115gr Blazer aluminum to subsonic 158gr loads. Purchased a bunch of spare parts before the BT USA debacle.
GHM9 Upgrades
HBI extended charging handle (Cant find factory charging handle)
HBI Safety kit
Magpul K2 Grip
Primary Arms 1x Red dot Micro Prism with ADM QD mount
Olight Valkyrie weapons light.
A3 aluminum angled foregrip
Forward Controls key-mo flash hider.
Ammo:
Two boxes of AE 147gr,
Two boxes of Fiocchi 158gr.
200 rounds total. Both subsonic loads
Magazines:
Two Glock 33 rounders
Two Magpul 27 rounders
Two Magpul 17 rounders
Dead Air Wolfman Accessories:
Key Mo install wrenches.
1/2x28 Direct thread adapter
Extra suppressor segment to go 'long',
Wipe muzzle attachment to quiet it even further.
GHM9 Parts:
Stock pistol grip.
Spare Factory Recoil Spring
Spare Factory Firing Pin
Spare Extractor
OEM Safety selector parts
OEM polymer sights.
Factory Single Point sling
Polymer buttstock
Pack of screws to upgrade to Elftmann Trigger if owner wishes.
Factory Case.
Other Accessories:
Magpul Sling with Picatinny RSA clip.
Olight Pressure Pad
5.11 molle 9mm magazine pouch
Asking $2500. NOT WILLING TO SEPARATE PACKAGE at this time. NO TRADES at this time. All NFA laws apply. Must transfer at FFL. Payment expected at time when paperwork starts. This would have two transfers. Buyer pays for all transfer fees. Contact me via PM for dealer transfer options since FFL's have different pricing and procedures. Did a Form 4 suppressor transfer last month to private buyer, took 7 days to approve from submission time. SBR maybe same approval time or longer.
https://bt-usa.com/products/ghm9c/
Original owner, great condition, converted into SBR during ATF brace amnesty. No additional engravings on the receiver. Has factory 3 position collapsible stock and also factory polymer side folder (latch does not line up to notch on receiver, I suspect it was meant for gen 1 receivers). Side folder extended functions fine as buttstock.
Also included in Dead Air Wolfman 9mm suppressor. The muzzle device installed uses key-mo quick attach system. Very versatile suppressor. Include original 1/2x28 direct thread adapter.
https://deadairsilencers.com/silencers/wolfman/
GHM9 with wolfman shoots great. Low recoil and almost no gas blowback suppressed. About 1500 rounds through platform. Shoots everything from cheap 115gr Blazer aluminum to subsonic 158gr loads. Purchased a bunch of spare parts before the BT USA debacle.
GHM9 Upgrades
HBI extended charging handle (Cant find factory charging handle)
HBI Safety kit
Magpul K2 Grip
Primary Arms 1x Red dot Micro Prism with ADM QD mount
Olight Valkyrie weapons light.
A3 aluminum angled foregrip
Forward Controls key-mo flash hider.
Ammo:
Two boxes of AE 147gr,
Two boxes of Fiocchi 158gr.
200 rounds total. Both subsonic loads
Magazines:
Two Glock 33 rounders
Two Magpul 27 rounders
Two Magpul 17 rounders
Dead Air Wolfman Accessories:
Key Mo install wrenches.
1/2x28 Direct thread adapter
Extra suppressor segment to go 'long',
Wipe muzzle attachment to quiet it even further.
GHM9 Parts:
Stock pistol grip.
Spare Factory Recoil Spring
Spare Factory Firing Pin
Spare Extractor
OEM Safety selector parts
OEM polymer sights.
Factory Single Point sling
Polymer buttstock
Pack of screws to upgrade to Elftmann Trigger if owner wishes.
Factory Case.
Other Accessories:
Magpul Sling with Picatinny RSA clip.
Olight Pressure Pad
5.11 molle 9mm magazine pouch
Asking $2500. NOT WILLING TO SEPARATE PACKAGE at this time. NO TRADES at this time. All NFA laws apply. Must transfer at FFL. Payment expected at time when paperwork starts. This would have two transfers. Buyer pays for all transfer fees. Contact me via PM for dealer transfer options since FFL's have different pricing and procedures. Did a Form 4 suppressor transfer last month to private buyer, took 7 days to approve from submission time. SBR maybe same approval time or longer.
Last edited:
