vortex0178
Active Member (5.56mm)
Forum Supporter
2023 Supporter
2024 Supporter
Trading Post Subscriber
Up for sale is a nearly complete EPC-9 lower and upper receiver set. I got this for my home defense gun but have since graduated to an MPX for that purpose so no longer need this setup. All components are very lightly used, definitely under 500rds. This is the same setup I run in my competition EPC-9, and it has worked wonderfully. This was purchased as and is being sold as a receiver, so to complete this you will need a barrel, handguard/barrel nut, and stock or brace. Below is a build list; I value the components as north of $950 if you were to buy them new; I'm asking $700 for this build. Buyer covers transfer at Freedom Firearms.
Aero EPC-9 Upper & Lower Receivers with LRBHO
Kaw Valley Precision 9mm Blowback Bolt
Kynshot RB5015HD Buffer
Kynshot Spacer Weight x2 (note that with both installed, it is short stroked and the LRBHO does not work)
Sprinco Orange 308 Spring
KAK A5 9 Position Buffer Tube
Rogue Ops Aluminum AR Pistol Grip
Ambi Charging Handle (Radian Raptor copy)
Larue MBT Flat Trigger
CMMG Lower Parts (Pivot/Takedown pins, castle nut, buffer retainer, detents, springs)
Schmid QD Receiver End Plate
KCI 32rd Mag
Aero EPC-9 Upper & Lower Receivers with LRBHO
Kaw Valley Precision 9mm Blowback Bolt
Kynshot RB5015HD Buffer
Kynshot Spacer Weight x2 (note that with both installed, it is short stroked and the LRBHO does not work)
Sprinco Orange 308 Spring
KAK A5 9 Position Buffer Tube
Rogue Ops Aluminum AR Pistol Grip
Ambi Charging Handle (Radian Raptor copy)
Larue MBT Flat Trigger
CMMG Lower Parts (Pivot/Takedown pins, castle nut, buffer retainer, detents, springs)
Schmid QD Receiver End Plate
KCI 32rd Mag
