Original purchase price was $777 - Test fit once on a G19 I was building went in a different direction completely. Looking for $400 obo - full advertisement follows;
VooDoo Innovations for Glock 19 VDI Glock 9mm Slide Assembly Enforcer Trijicon RMR Cut G19
This VooDoo Innovations product is made for the Glock 9mm. The Slide Assembly is designed as an improved drop-in fit for the Glock. The VDI Slide is profiled and lightened to reduce recipricol mass and decrease felt recoil. Our VDI Slides are cut from stainless steel with enhanced front and rear cocking serrations for improved manipulation and improved slide geometry to draw your eye to the front sight. The VDI Barrel is machined to tighter fitment tolerances to increase accuracy potential without the need of gunsmith fitting. The barrel features a SAAMI spec 9mm Match chambering, Match Grade Rifling to allow the use of any 9mm projectile (not just jacketed bullets), threaded ½ x 28 TPI for use with 9mm suppressors and compensators, machined from 416R stainless steel, and Finished in Voodoo Innovations LifeCoat process. Includes VDI Thread Protector. The Enforcer Model includes Micro Red Dot Relief Cut with Cover Plate and upgraded XS Sights Dot Sights.
FEATURES
Complete Replacement (9x19MM) Slide Assembly
Profiled and Lightened Slide to Reduce Reciprocal Mass and Decrease Felt Recoil
Enhanced Front and Rear Cocking Serrations for Improved Manipulation
Improved Slide Geometry to Draw Your Eye to the Front Sight
Threaded Barrel for Suppressor or Compensator Use
Billet Extractor
Includes XS Dot Suppressor-Height Sights
Micro Red Dot Relief Cut with Cover Plate
3 recoil springs so you may tailor the gun to your shooting.
Green - Standard spring
Yellow - 5% lighter spring for subsonic ammunition
Red - 5% Stronger spring for +P ammunition
9mm Match Grade Barrel
SAAMI Spec 9mm Match Chambering
Tighter Tolerances for Accuracy
Match Grade Rifling
Allows for use of any 9mm projectile, not just jacketed bullets
Threaded with Protector
½ x 28 TPI for Compensators and Suppressors
LifeCoat Finish
Melonite & PVD
Made in the USA
Life-Time Warranty
Micro Red Dot Relief Cut Version:
Trijicon RMR
Burris Fastfire III/ Vortex Venom
SPECIFICATIONS
416R Stainless Steel
1:16 Twist
Chambered 9x19mm
Compatible with All Gen Glock Frames (Gen 4 requires use of adapter)
FRAME NOT INCLUDED
G19 Options Compatible with the following frames: 19, 23, and 32
VooDoo Innovations for Glock 19 VDI Glock 9mm Slide Assembly Enforcer Trijicon RMR Cut G19
This VooDoo Innovations product is made for the Glock 9mm. The Slide Assembly is designed as an improved drop-in fit for the Glock. The VDI Slide is profiled and lightened to reduce recipricol mass and decrease felt recoil. Our VDI Slides are cut from stainless steel with enhanced front and rear cocking serrations for improved manipulation and improved slide geometry to draw your eye to the front sight. The VDI Barrel is machined to tighter fitment tolerances to increase accuracy potential without the need of gunsmith fitting. The barrel features a SAAMI spec 9mm Match chambering, Match Grade Rifling to allow the use of any 9mm projectile (not just jacketed bullets), threaded ½ x 28 TPI for use with 9mm suppressors and compensators, machined from 416R stainless steel, and Finished in Voodoo Innovations LifeCoat process. Includes VDI Thread Protector. The Enforcer Model includes Micro Red Dot Relief Cut with Cover Plate and upgraded XS Sights Dot Sights.
FEATURES
Complete Replacement (9x19MM) Slide Assembly
Profiled and Lightened Slide to Reduce Reciprocal Mass and Decrease Felt Recoil
Enhanced Front and Rear Cocking Serrations for Improved Manipulation
Improved Slide Geometry to Draw Your Eye to the Front Sight
Threaded Barrel for Suppressor or Compensator Use
Billet Extractor
Includes XS Dot Suppressor-Height Sights
Micro Red Dot Relief Cut with Cover Plate
3 recoil springs so you may tailor the gun to your shooting.
Green - Standard spring
Yellow - 5% lighter spring for subsonic ammunition
Red - 5% Stronger spring for +P ammunition
9mm Match Grade Barrel
SAAMI Spec 9mm Match Chambering
Tighter Tolerances for Accuracy
Match Grade Rifling
Allows for use of any 9mm projectile, not just jacketed bullets
Threaded with Protector
½ x 28 TPI for Compensators and Suppressors
LifeCoat Finish
Melonite & PVD
Made in the USA
Life-Time Warranty
Micro Red Dot Relief Cut Version:
Trijicon RMR
Burris Fastfire III/ Vortex Venom
SPECIFICATIONS
416R Stainless Steel
1:16 Twist
Chambered 9x19mm
Compatible with All Gen Glock Frames (Gen 4 requires use of adapter)
FRAME NOT INCLUDED
G19 Options Compatible with the following frames: 19, 23, and 32
Last edited: