Janizary
Geth Prime
Forum Supporter
2019 Supporter
2020 Supporter
2022 Supporter
2023 Supporter
2024 Supporter
2025 Supporter
2026 Supporter
Trading Post Subscriber
1 - Pics (See below)
2 - Price (both): $420ea w/ stock QRP2 mount or $540ea w/ BoBro mount
3 - Location (Henderson)
In Henderson. Meet at GVR, RC Willey/WinCo, Sportsman's Warehouse (Henderson), Bass Pro, RC Willey Summerlin. Not really looking for trades at the moment, however, if you have one of the following I'd consider as a partial trade:
Trades valued either at (1) $512 and $180, respectively (PRO and BoBro, respectively) or (2) negotiated low retail to low retail by PM.
"I'll take it" rules apply and override PMs in process. My usual disclaimer: Weekday availability M-Th is terrible (~530P-730P, or 'lunch' meets near me). Fri/Sat/Sun 'most' daylight hours (events creep in so availability changes).
Aimpoint PRO - Used - $420ea w/ stock QRP2 mount or $540ea w/ BoBro mount
Each is very lightly used in excellent condition and functions perfectly. These are my remaining PROs that I have as I have swapped for CompM4s one by one. So, these one can find a new owners.
Each of these has a BoBro Aimpoint mount installed (and leveled properly). If you've used BoBro you know they are known for 'absolute return to zero' if you pull it off and put it back on. I had all my ML3s and PROs with these BoBro mounts and they can't be beat for RTZ. You can purchase the PRO without the BoBro. It will come with the stock QRP2 mount in its place.
Each PRO comes with the original serial number matched box, manual, Allen key, and low mount bolts included. These are the version with the old-style caps and retainers. Aimpoint switched to a new format low profile caps with the plastic retainers for cost savings / economies of scale a bit back.
One PRO has Ranger Wrap still applied (all were previously wrapped). Left it on as I thought someone might be interested. Comes off with a bit of know how to remove with the adhesive backing on the wrap, not on the optic.
Features and Specifications (https://aimpoint.us/aimpoint-patrol...sight-with-qrp2-mount-and-spacer-2-moa-12841/):
2 - Price (both): $420ea w/ stock QRP2 mount or $540ea w/ BoBro mount
3 - Location (Henderson)
In Henderson. Meet at GVR, RC Willey/WinCo, Sportsman's Warehouse (Henderson), Bass Pro, RC Willey Summerlin. Not really looking for trades at the moment, however, if you have one of the following I'd consider as a partial trade:
- Interesting .223 Match ammo in small lots at a reasonable ask so I can add to my barrel eval ammo lots
- Centurion SE Cutdown Midweight Hammer Forged 12.5" 5.56 barrel*
- Centurion 11.5" "FBI" Hammer Forged Barrel*
- Centurion 8.5" 1:5T 330BLK Barrel*
- Criterion Core 13.9" 223Wylde Barrel*
- Criterion Core 8.5" 300BLK Barrel*
- KAK/Faxon 12.5" mid-gas barrel*
- If you have a 12.5", 18" or 20" 'match' barrel in 223W or 5.56 I might be interested if it strikes my 'let's test it' bug
Trades valued either at (1) $512 and $180, respectively (PRO and BoBro, respectively) or (2) negotiated low retail to low retail by PM.
"I'll take it" rules apply and override PMs in process. My usual disclaimer: Weekday availability M-Th is terrible (~530P-730P, or 'lunch' meets near me). Fri/Sat/Sun 'most' daylight hours (events creep in so availability changes).
Aimpoint PRO - Used - $420ea w/ stock QRP2 mount or $540ea w/ BoBro mount
Each is very lightly used in excellent condition and functions perfectly. These are my remaining PROs that I have as I have swapped for CompM4s one by one. So, these one can find a new owners.
Each of these has a BoBro Aimpoint mount installed (and leveled properly). If you've used BoBro you know they are known for 'absolute return to zero' if you pull it off and put it back on. I had all my ML3s and PROs with these BoBro mounts and they can't be beat for RTZ. You can purchase the PRO without the BoBro. It will come with the stock QRP2 mount in its place.
Aimpoint PRO Single Ring QD Mount
www.bobroengineering.com
Each PRO comes with the original serial number matched box, manual, Allen key, and low mount bolts included. These are the version with the old-style caps and retainers. Aimpoint switched to a new format low profile caps with the plastic retainers for cost savings / economies of scale a bit back.
Aimpoint PRO Single Ring QD Mount
www.bobroengineering.com
One PRO has Ranger Wrap still applied (all were previously wrapped). Left it on as I thought someone might be interested. Comes off with a bit of know how to remove with the adhesive backing on the wrap, not on the optic.
Features and Specifications (https://aimpoint.us/aimpoint-patrol...sight-with-qrp2-mount-and-spacer-2-moa-12841/):
- 2 MOA dot size
- 30,000 hours (over 3 years) of constant operation
- 4 night vision compatible settings and 6 daylight settings
- Weight 7.8 oz / 220 g (sight only)
- Submersible to 150 feet (45 meters)
- Front lens opening is threaded for addition of killFlash® anti-reflective device
- Includes: QRP2 Mount & Spacer, Flip-Up Lens covers, DL1/3N battery, and Allen Key
Last edited:
