xJewishNinjax
Active Member (5.56mm)
Forum Supporter
2023 Supporter
2024 Supporter
2026 Supporter
Trading Post Subscriber
Open to firearm trades plus cash
Testing water on a 1980 280zx slick top coupe. Currently white and was painted by original owner. Original color is blue. Spark plugs, ignition coil, belts, coolant hose and water pump done by previous owner. Has a new fuel pump put on by PO but needs check valve installed. I put in new headlights, universal racing seats, steering wheel, aftermarket air intake and a wilwood 1” brake master cylinder. I changed the engine oil, trans oil and diff oil when I got it. Also replaced the driver side taillight housing have the spare passenger side taillight housing as well.
Cons are the usual dash cracking and the paint is flaking off exposing the og blue. Some light rust but I haven’t noticed anything crazy, tint will need to be redone, front windshield has some previous chips repaired. Blower blows but PO took the dash off and I don’t think they put the vent ducting on properly. Needs a radio and speakers. Rear driver side shock is leaking.
I 3d printed a shift bezel, wink mirror brackets and air intake bracket. I do have some of the oem parts including steering wheel, cruise control actuator (not sure if it works) injector fan (don’t think it works), shift knob, new fuel filter, some tail light seals. Come take a look and feel free to ask questions. Clean title classic registered 1447xx miles.
I use this is as an around town cruiser. Furthest I’ve driven it is to the strip and back.
$7000 obo, trade for firearms plus cash, no test drives without cash in hand.
Located by Aliante
Testing water on a 1980 280zx slick top coupe. Currently white and was painted by original owner. Original color is blue. Spark plugs, ignition coil, belts, coolant hose and water pump done by previous owner. Has a new fuel pump put on by PO but needs check valve installed. I put in new headlights, universal racing seats, steering wheel, aftermarket air intake and a wilwood 1” brake master cylinder. I changed the engine oil, trans oil and diff oil when I got it. Also replaced the driver side taillight housing have the spare passenger side taillight housing as well.
Cons are the usual dash cracking and the paint is flaking off exposing the og blue. Some light rust but I haven’t noticed anything crazy, tint will need to be redone, front windshield has some previous chips repaired. Blower blows but PO took the dash off and I don’t think they put the vent ducting on properly. Needs a radio and speakers. Rear driver side shock is leaking.
I 3d printed a shift bezel, wink mirror brackets and air intake bracket. I do have some of the oem parts including steering wheel, cruise control actuator (not sure if it works) injector fan (don’t think it works), shift knob, new fuel filter, some tail light seals. Come take a look and feel free to ask questions. Clean title classic registered 1447xx miles.
I use this is as an around town cruiser. Furthest I’ve driven it is to the strip and back.
$7000 obo, trade for firearms plus cash, no test drives without cash in hand.
Located by Aliante
Last edited:
