WTS Please lock - Grizzly Targets BYOR (build your own range) steel target hanger

[Janizary]

1 - Pics (See below)
2 - Price:

• Grizzly Targets BYOR - $80
• LV Steel Targets Hanger - SOLD

3 - Location (Henderson)

In Henderson. Meet GVR, RC Willey/WinCo, Sam's Town, BassPro, Costco lot St. Rose Pkwy, RC Willey Summerlin. Not really looking for trades much, maybe a Geissele SSA or SD-C or some boxed Hornady Frontier 75gr ammo. All trades valued market-to-market as a starting point.

"I'll take it" rules apply and override PMs in process. My usual disclaimer: Weekday availability M-Th is terrible (~530P-730P, or 'lunch' meets near me). Fri/Sat/Sun 'most' daylight hours (events creep in so availability changes).

_____________________________________________________________________
_____________________________________________________________________

A couple of steel target hangers that I've had around for some time. I'm using a new modular arcade system now for my hangar needs so these can have a new home.

Grizzly Targets BYOR (Build Your Own Range) steel target hanger - Used - $80

• Two Base stands and two vertical T connectors.
• I will include (if you want them):
  • Six 2x4 'feet' sections
  • Two upright 2x4 sections
  • Two 'wing' 2x4s
  • You'll need to source your own top 2x4 or I can give you one of my shorter units (sorry that long 2x4 is slated for another project)
  • All of the wood is used
• You can screw I-Bolts, hook/hanger screws, etc., into the top wood for various hanging options. I've hung 4 targets from the main top wood and a big gong from the two post caps commonly. Add in the wings and you can get upwards of 9 targets hanging, or 12-14 KYL (Know Your Limits) small steel targets at the same time.

https://auctionarmory.com/product/byor-vertical-t-connector/
https://auctionarmory.com/product/byor-stand/

Product Description (from the Mfg):

• The Build Your Own Range (BYOR) Stand is the do everything stand of Grizzly Targets. This stand breaks down easily, and allows for multiple stances and customization. The 2x4s that are inserted into the legs can be trimmed according to the desired angle you want. In case of uneven ground or a desired tilt forward or back, simply trim up the 2x4s.
• The top 2×4 then slides easily into the slot, and can be trimmed to give you the exact height you are looking for with your target. The entire unit is hot dipped galvanized, so that it will last longer than you do. A thumb screw in the back assures that whatever is used will be held secure.

For example purposes only. Does not includes all the arcade gear.

_____________________________________________________________________
_____________________________________________________________________

LV Steel Targets "Swing Set" Brackets - Used - SOLD

Yes, these are the LVSteeltargets hangers built by our local Kurt Stone.

https://lvsteeltargets.com/ (then scroll way down the page to the product)

• One set - used
• One topper has a round in the angled 'armor' plating, but it is perfectly functional (You know who you are that did that )
• I will include the top pipe and hardware (if you want it)
• 4 conduit legs are not included

These can use conduit, plumbing pipe, whatever you have on hand that fits in the holes.

 

[JB33]

Message sent

 

[JB33]

I’ll take LV Steel hanger setup per PM’s.

 

[Janizary]

LVSteel Targets Swing Set - SPF - JB33

 

[Janizary]

Bump

 

[Janizary]

Bump

 

[Janizary]

Bump

 

[Janizary]

LV Steel Target 'Swing Set' hanger - SOLD - JB33

 

[Janizary]

Bump

 

[Janizary]

Bump

 

[Janizary]

Please lock.

The Grizzly Target BYOR is still available after close. PM me if interested.