WTS Please close - Consolidated






Status
Not open for further replies.

Janizary

Geth Prime
Forum Supporter
2019 Supporter
2020 Supporter
2022 Supporter
2023 Supporter
2024 Supporter
2025 Supporter
Trading Post Subscriber
Rating - 100%
150   0   0
#1
***UPDATE: Remaining uppers from this thread have been consolidate in to one big upper thread HERE***

____________

1 - Pics (See below)
2 - Price
- PSA 16" FN CHF 410SS 'Standard' front post upper #1 - $275
- PSA 16" FN CHF 410SS 'Standard' front post upper (Magpul HG) #2 - $275 **(Sold)**
- PSA 16" FN CHF 410SS SSK Midwest Industries 12" Railed upper - $350
- PSA 20" FN CHF 410SS SS15G2 Midwest Industries 15" Railed upper - $425
3 - Location (Henderson)

Not your standard PSA fare. Pulled from the dark recesses of the safe. heh. :) I collect odd things and these are odd-ducks in the PSA line-up (as you don't see them very often) with FN Cold Hammer Forged 410 Stainless barrels. Descriptions, photos, old PSA SKUs, and round counts below. No trades, no hummels. Might be interest in P320 or P365 + cash on my end.

In Henderson. Meet RC Willey lot, GVR lot, Sam's Town, BassPro, out to the M if you are out there, and maybe 215/Charleston (Best Buy) if you live way over that way...
____________________________________________________________________________

16" PSA FN CHF 410Stainless Upper w/front post sight - (2 1 Available) - $275

Standard hand-guard upper is available
Magpul hand-guard upper **Sold**

Description from PSA:
Barrel: 16" cold hammer forged, lightweight profile, matte finish, 410 stainless steel, 5.56 NATO chamber with a 1:7 twist, and a passivated exterior finish to reduce glare and increase corrosion resistance. Features a mid-length gas system, standard M4 feedramps, and is high pressure tested and mag particle inspected. The barrel is finished off with an F-marked front sight post with sling swivel, standard handguards and an A2 flash hider. Barrel is made for us by FN Manufacturing here in Columbia SC.

Upper: Forged 7075-T6 A3 AR upper is machined to MIL-SPECS and hard coat anodized. These uppers are made for us right here in the USA by a mil-spec manufacturer. No BCG or CH.

Old PSA SKU: 27334

Function tested, sighted, cleaned put away. ~20rnds total ea. Rear sight NOT included. $275 firm.

410SS STD CompositeSml.jpg

___________________
#3 PSA 16" FN CHF 410SS, 12" Midwest Industries rail SSK12 - $350

Description from PSA:
Barrel: 16" cold hammer forged, lightweight profile, matte finish, 410 stainless steel, 5.56 NATO chamber with a 1:7 twist, and a passivated exterior finish to reduce glare and increase corrosion resistance. Features a mid-length gas system, standard M4 feedramps, and is high pressure tested and mag particle inspected. The upper is finished off with a 12" lightweight Midwest Industries Gen2 Keymod free-float hand guard, .750" diameter low profile gas block, and A2 flash hider. Barrel is made for us by FN Manufacturing here in Columbia SC.

Upper: Forged 7075-T6 A3 AR upper is machined to MIL-SPECS and hard coat anodized. These uppers are made for us right here in the USA by a mil-spec manufacturer. No BCG or CH.

Old PSA SKU: 39778

~260rnds total. Sights NOT included. $350 firm.
___________________
#4 PSA 20" FN CHF 410SS, 15" Midwest Industries rail SS15G2 - $425

Description from PSA:
Barrel: 20" cold hammer forged, heavy profile, 410 stainless steel, 5.56 NATO chamber with a 1:7 twist, and tapered bore. Features a Rifle-length gas system, standard M4 feedramps, and is high pressure tested and mag particle inspected. The upper is finished off with a 15" lightweight Midwest Industries SS-series Gen2 free-float hand guard, .750" diameter low profile gas block, and A2 flash hider. Barrel is made for us by FN Manufacturing here in Columbia SC.

Upper: Forged 7075-T6 A3 AR upper is machined to MIL-SPECS and hard coat anodized. These uppers are made for us right here in the USA by a mil-spec manufacturer. No BCG or CH.

~120rnds. Sights NOT included. $425 firm.
CHF Railed2.jpg


I can provide NIB (New in tube...) PSA Premium 'logo' BCGs and Mil-spec CHs for $70 if you need them.
 
Last edited:

Janizary

Geth Prime
Forum Supporter
2019 Supporter
2020 Supporter
2022 Supporter
2023 Supporter
2024 Supporter
2025 Supporter
Trading Post Subscriber
Rating - 100%
150   0   0
#3
PSA 16" FN CHF 410SS 'Standard' front post upper (Magpul HG) #2 Sold to firearmsowner
 

Janizary

Geth Prime
Forum Supporter
2019 Supporter
2020 Supporter
2022 Supporter
2023 Supporter
2024 Supporter
2025 Supporter
Trading Post Subscriber
Rating - 100%
150   0   0
#4
Punt
 
Last edited:

Janizary

Geth Prime
Forum Supporter
2019 Supporter
2020 Supporter
2022 Supporter
2023 Supporter
2024 Supporter
2025 Supporter
Trading Post Subscriber
Rating - 100%
150   0   0
#5
Bump before consolidation
 
Status
Not open for further replies.