WTS Machinist's Tools - Bump - Micrometers added

[vinnybass]

KDK toolpost (100 series) with six tool holders, 01, 04, 102, 103, and 2ea. 105 boring bar holder. Turning tools with inserts included. Parting tool included. Numerous boring bars included. $200.

Indexing head. Used very little. $150

Criterion Boring Head - R8 shank. Can include some boring tools. $75

Angle Plate - 8"x 6"x 5" cast iron, no hack marks - $40

5C collet indexer - $75

5C collet blocks hex and square - $50

Bull-nose live center ( German made) 3.938" OD #3 Morse taper shank. $40

Located near the airport for now. Discounts given for multiple items. More to come as soon as I workout the pictures. Cash or Zelle.

 

[vinnybass]

Mitutoyo 0-6" outside micrometer set with standards. .0001" reading. Carbide faces. 1" & 2" have friction thimble, the rest have ratchet thimble. These have been my personal use mikes since the 70's, and have been treated immaculately. None of these have ever been dropped or bounced. NONE. EVER. You won't find a nicer set. $400.

Mitutoyo 2"-12" inside micrometer set. Same story as above. Immaculate. $200

Lufkin 0-3" depth mike set. Good condition. The one inch rod has the tip diameter reduced for a special job I did way back when. Still reads perfectly. $50