WTS - EGW Parts w/ Atlas Trigger (Not Looking for Trades)
Price $425 (Firm): Paid: About $690-$700 after tax and shipping.
Location: Aliante Area; Can meet at Sheepdog Gun Armory, Spartan Arms, Ventura Munitions, and Freedom Firearms
Got parts that I was planning on using for a DS 1911/ 2011 but ended up never getting around to it. *All parts included are for a Series 70 - 1911/DS1911/2011 chambered in 9mm. (Disclaimer) For those of you who are familiar with building out 1911s and 2011s you know these parts are not cheap to come by, therefore I will not be lowering the price on this whatsoever. For those who are not familiar with these parts keep in mind that most of these require hand fitting by a gunsmith and will not simply drop-in like aftermarket Glock and Sig parts. *This is being sold as an entire set not by piece. Parts listed below w/ picture:
- EGW HD Ambi Thumb Safety (*HD denotes Heavy Duty)
- EGW Plunger Tube Spring, and Pins for Safety and Slide Stop (Stainless Steel)
- EGW HD Extractor
- EGW HD Slide Stop Oversized (.200")
- EGW HD Oversized Ejector
- EGW Ejector Pin (Stainless Steel)
- EGW Oversized Firing Pin Stop (Series 70)
- EGW Firing Pin (.068")
- EGW Hammer Strut (Stainless Steel) w/ Hammer Strut Pin (Stainless Steel)
- EGW Solid Hammer (Blued and Stainless Steel) w/ Hammer Pin (Stainless Steel)
- EGW Extra Long Ejector (Stainless Steel)
- EGW Hard Sear and Pin (Stainless Steel)
- EGW (Colt) Leaf Spring
- Wilson Combat Bulletproof Extractor (Stainless Steel)
- Atlas Short Trigger (Black) w/ Double Stack Trigger Bow
Price $425 (Firm): Paid: About $690-$700 after tax and shipping.
Location: Aliante Area; Can meet at Sheepdog Gun Armory, Spartan Arms, Ventura Munitions, and Freedom Firearms
Got parts that I was planning on using for a DS 1911/ 2011 but ended up never getting around to it. *All parts included are for a Series 70 - 1911/DS1911/2011 chambered in 9mm. (Disclaimer) For those of you who are familiar with building out 1911s and 2011s you know these parts are not cheap to come by, therefore I will not be lowering the price on this whatsoever. For those who are not familiar with these parts keep in mind that most of these require hand fitting by a gunsmith and will not simply drop-in like aftermarket Glock and Sig parts. *This is being sold as an entire set not by piece. Parts listed below w/ picture:
- EGW HD Ambi Thumb Safety (*HD denotes Heavy Duty)
- EGW Plunger Tube Spring, and Pins for Safety and Slide Stop (Stainless Steel)
- EGW HD Extractor
- EGW HD Slide Stop Oversized (.200")
- EGW HD Oversized Ejector
- EGW Ejector Pin (Stainless Steel)
- EGW Oversized Firing Pin Stop (Series 70)
- EGW Firing Pin (.068")
- EGW Hammer Strut (Stainless Steel) w/ Hammer Strut Pin (Stainless Steel)
- EGW Solid Hammer (Blued and Stainless Steel) w/ Hammer Pin (Stainless Steel)
- EGW Extra Long Ejector (Stainless Steel)
- EGW Hard Sear and Pin (Stainless Steel)
- EGW (Colt) Leaf Spring
- Wilson Combat Bulletproof Extractor (Stainless Steel)
- Atlas Short Trigger (Black) w/ Double Stack Trigger Bow
Last edited: