No trades please. Would like to do the transfer at Freedom Firearms. Upper has around 500 rounds. Lower with components are brand new, never fired. The upper and lower will be given to the buyer in 2 separate pieces to avoid legal issues. If you plan to install the upper and lower together, you'll need to SBR before you do so. Don't get in trouble doing anything silly. $3,400
11.5 V-Seven fluted barrel w/ their special exterior coating. This thing is VERY accurate. Probably the best barrel i've had.
Daniel Defense RIS III
Radian ADAC lower
Radian SL charging handle
EOTech EXPS 3 w/ Unity riser
Surefire M640DF Pro Turbo w/ Unity Gascap and Axon SL switch.
Surefire 3 prong
Sionics NP3 coated bolt carrier with Centurion V2 bolt (dual extractors)
TriggerTech Diamond trigger
CQD endplate, DD front iron, Troy rear iron, Rail Scales, Drew Meyer Chop Stop, FCD Safety, Magpul SL-S, SOLGW A5 buffer tube with Geissele braided Super 42 spring, Driven Arms magwell and pistol grip, sling, MLok sling mount.
Edit: This doesn't have a buffer retaining pin. I've had a couple issues in the past with them so i elect to never install them. I just manually push the buffer in when attaching the upper receiver to my lowers. Thought that should be mentioned. If you have any issues with this, its pretty easy and i'll show you how to deal with attaching the upper and manually pushing in the buffer/spring.
11.5 V-Seven fluted barrel w/ their special exterior coating. This thing is VERY accurate. Probably the best barrel i've had.
Daniel Defense RIS III
Radian ADAC lower
Radian SL charging handle
EOTech EXPS 3 w/ Unity riser
Surefire M640DF Pro Turbo w/ Unity Gascap and Axon SL switch.
Surefire 3 prong
Sionics NP3 coated bolt carrier with Centurion V2 bolt (dual extractors)
TriggerTech Diamond trigger
CQD endplate, DD front iron, Troy rear iron, Rail Scales, Drew Meyer Chop Stop, FCD Safety, Magpul SL-S, SOLGW A5 buffer tube with Geissele braided Super 42 spring, Driven Arms magwell and pistol grip, sling, MLok sling mount.
Edit: This doesn't have a buffer retaining pin. I've had a couple issues in the past with them so i elect to never install them. I just manually push the buffer in when attaching the upper receiver to my lowers. Thought that should be mentioned. If you have any issues with this, its pretty easy and i'll show you how to deal with attaching the upper and manually pushing in the buffer/spring.
Last edited:
