We got a couple of these in and they are listed at a awesome price!
MSRP is $1799 Your Price $1399 - Must mention Nevada Shooters Special
The Daniel Defense M4 Carbine, V3 combines the benefits of the original V1 with the advantages of a mid-length gas system. Built around a 16-inch Cold Hammer Forged Barrel, the DDM4v3 provides shooters a 9 inch free float DDM4 Rail™, and a vertical foregrip for better weapon manipulation. This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.
MATERIALS & CONSTRUCTION
LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 16″ Government Profile, Mid-length Gas System, Chrome Lined, MP Tested, and Mil-Spec Heavy Phosphate Coated
GAS SYSTEM: Front Sight Base CNC machined from 4140 steel and Salt Bath Nitride Finished, Mid-length, Direct Impingement
MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
BUFFER: H Buffer
SIGHTS: Daniel Defense A1.5 Fixed Rear Sight: CNC Machined from 6061-T6 aluminum, Type III Hard Coat Anodized; Daniel Defense FSP: CNC Machined from 4140 steel, Salt Bath Nitride Finished
HANDGUARD: Daniel Defense DDM4 Rail™ 9.0, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized
RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
GRIP: Daniel Defense Vertical Grip, Glass Filled Polymer with Soft Touch Overmolding
RAIL LADDERS: 3 low profile ladders made from Santoprene, heat resistant to 300° F.
Made in the USA!
WARRANTY STATEMENT
All Daniel Defense products carry a 100% satisfaction guarantee against defects in original materials and workmanship. If your Daniel Defense product shows evidence of such defects, Daniel Defense will make every accommodation to fix, repair, or replace your rail system in the most expeditious and inexpensive manner possible. Daniel Defense does not warranty products or damage caused to our products by the correct or incorrect installation of other manufacturer’s products. Be sure to retain your sales slip as proof of purchase date when making a claim.
Price doesn't include a $25 background check fee, If you have a valid CCW issued after July 1st, 2011 then the fee can be waived.
Call Davidson's, were all firearms have the best price in town!.
Davidson's Firearms
10890 S Eastern Ave
Suite 103
Henderson, NV 89052
702-456-6600.
Hours:
Monday : By Appt
Tuesday - Friday : 10:00am to 5:30pm
Saturday : 11:00am to 4:00pm
MSRP is $1799 Your Price $1399 - Must mention Nevada Shooters Special
The Daniel Defense M4 Carbine, V3 combines the benefits of the original V1 with the advantages of a mid-length gas system. Built around a 16-inch Cold Hammer Forged Barrel, the DDM4v3 provides shooters a 9 inch free float DDM4 Rail™, and a vertical foregrip for better weapon manipulation. This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.
MATERIALS & CONSTRUCTION
LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 16″ Government Profile, Mid-length Gas System, Chrome Lined, MP Tested, and Mil-Spec Heavy Phosphate Coated
GAS SYSTEM: Front Sight Base CNC machined from 4140 steel and Salt Bath Nitride Finished, Mid-length, Direct Impingement
MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
BUFFER: H Buffer
SIGHTS: Daniel Defense A1.5 Fixed Rear Sight: CNC Machined from 6061-T6 aluminum, Type III Hard Coat Anodized; Daniel Defense FSP: CNC Machined from 4140 steel, Salt Bath Nitride Finished
HANDGUARD: Daniel Defense DDM4 Rail™ 9.0, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized
RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
GRIP: Daniel Defense Vertical Grip, Glass Filled Polymer with Soft Touch Overmolding
RAIL LADDERS: 3 low profile ladders made from Santoprene, heat resistant to 300° F.
Made in the USA!
WARRANTY STATEMENT
All Daniel Defense products carry a 100% satisfaction guarantee against defects in original materials and workmanship. If your Daniel Defense product shows evidence of such defects, Daniel Defense will make every accommodation to fix, repair, or replace your rail system in the most expeditious and inexpensive manner possible. Daniel Defense does not warranty products or damage caused to our products by the correct or incorrect installation of other manufacturer’s products. Be sure to retain your sales slip as proof of purchase date when making a claim.
Price doesn't include a $25 background check fee, If you have a valid CCW issued after July 1st, 2011 then the fee can be waived.
Call Davidson's, were all firearms have the best price in town!.
Davidson's Firearms
10890 S Eastern Ave
Suite 103
Henderson, NV 89052
702-456-6600.
Hours:
Monday : By Appt
Tuesday - Friday : 10:00am to 5:30pm
Saturday : 11:00am to 4:00pm
Attachments
Last edited: